One of the best things about technology today is that we can have the latest and greatest computers, we can have the best headphones, and we can also take care of sound quality with a microphone. We can go to a party and not have to worry about someone blasting their music over the PA system. Now you might be thinking “Why does my mic sound so much different to the mic on stage?” There are some simple reasons.
Let’s first start off with the equipment. The mic is set up differently in the studio than it is on stage. In the studio, there are usually two mikes; one directed into the ear of the listener and one directed away. In a sound check, the engineer will play tracks and listen to the sound of each mic.
Often, engineers will use a pad or cushion on stage to get different sounds. Sometimes they’ll do a mix between the two mics. But, when you’re in’s on stage, you’re in’s right there. This means that your mike will pick up other sounds around you and change the sound of your voice or your music. The signal coming from your computer speakers, your monitor speakers, and your drum kit is then reflected by the mic and sent back to your computer.
With many microphones, the circuitry in the microphone changes the signal that comes through. The mic sound may be different to what you expected. In addition, the phase of the signal and the strength of the signal can be affected. So, why does my mic sound so much different to the mic on stage?
First, if the cables are long enough, any and all factors mentioned above can be removed. However, long cables are quite expensive and are not always available. Second, sometimes the cables used for mic sound are not of the best quality. The sound from cheap headphones can be quite different to microphones that are set up right. Also, microphones sometimes have a poor signal if the transducers are too close together.
If you want to know why does my mic sound so much different to the mic on stage, then you really need to think about how the sound is recorded. Sound recording is done with speakers. The microphones to capture the sound as it comes through the speakers. If the speakers are poor, the sound will be dull or muddy.
Another reason why the sound is different to the mic on stage, is because of positioning. When the sound waves hit the microphone, they reflect off the surface, which can cause some very strange sounds. The sound engineers try to minimize this problem by placing the microphones at different locations on the stage. Sometimes, the mikes are placed on different locations in the audience so that the sound waves do not hit the floor. Usually, these mikes are also placed higher up so that the distance between the mic and the audience is smaller, which means a smaller range for the sounds.
Other reasons why does my mic sound so much different to the mic on stage is because the wires used to feed the sound into the mic preamps. The cables used in small rooms are thin and can get obstructed with other cables. The mic preamps usually have more resistance than the cables, which then cause the mice to generate a much different sound.
Some microphones are better when it comes to capturing studio quality sound. There are three different technologies in this regard – DIaphragms, condenser microphones, and capsules. I will explain why does my mic sound so much different to the mic on stage.
DIaphragms use a piston driven diaphragm to push back and forth against a spring, which then creates a piston effect. Condenser microphones use a diaphragm to record sound, but they use electronics to trigger the vibrations to a drive unit that then produces the music. Capsules are another type of microphone, which has a diaphragm and a capsule attached to the diaphragm. This capsule is also attached to the preamp. These three different types of microphones use different mechanisms to generate the sound, which can make them very expensive to reproduce on a stage.
If you are looking for a mic that works as well on a stand as it does when you’re recording, you may want to consider a condenser mic. These microphones have a diaphragm inside of them, but they have a capsule attached to the diaphragm that’s activated by the vibrations from the diaphragm. In other words, when you hit it, the capsule pushes it back, which then creates the vibrations that the sound waves pick up and then repeats it once more. In short, the diaphragm is not what makes the sound, but the diaphragm, the capsule, and the preamp, which are all used in conjunction with one another to reproduce the sounds beautifully on a consistent basis.